EU customs reform 2026: what the new Union Customs Code changes for non-EU hardware importers and their representatives
By Comex IOR Services · Published · Last updated · 12 min read

In this guide
- What is the EU customs reform and when does it apply?
- Who is the importer under the new Union Customs Code?
- What changes for your EU indirect customs representative?
- Can a non-EU company still import into the EU without an EU entity?
- What will the importer answer for besides duties?
- How do Trust and Check, the EU Customs Authority and the Data Hub affect hardware shipments?
- Does the end of the EUR 150 exemption matter for B2B hardware?
- What should non-EU hardware vendors do before September 2027?
- Frequently asked questions
The EU customs reform replaces the Union Customs Code with Regulation (EU) 2026/2108, in force since 20 September 2026, with most rules applying from 21 September 2027. For non-EU hardware sellers, the big change is legal: customs will look to a defined importer, and an EU indirect representative acting for you will carry the importer's full compliance duties.
That sounds technical, and most of it will not touch a shipment of servers next week. Clearance today still runs under the current code. But the reform rewrites who answers to customs when a company outside the European Union sells switches, storage arrays or GPU servers to an EU customer, and the representatives who sign those declarations are already adjusting their terms. A vendor that plans 2027 deliveries now, with contracts and documents built for the new rules, avoids the scramble that usually follows a reform of this size.
This guide explains what the EU customs reform actually changes, the dates that matter, what it means for the indirect representative you rely on, and what a non-EU hardware company should do before the main provisions apply.
What is the EU customs reform and when does it apply?
It is the first full rewrite of EU customs law since 2013. The new Union Customs Code was adopted on 16 September 2026, published in the Official Journal on 19 September and entered into force the next day, but its provisions switch on in stages between 2027 and 2034.
The legal text is the new Union Customs Code, Regulation (EU) 2026/2108. It replaces Regulation (EU) No 952/2013, the code that has governed EU imports since 2016, and it rests on three ideas: a clear importer who is responsible towards customs, a single EU Customs Authority to coordinate risk analysis, and an EU Customs Data Hub that will eventually replace the national declaration systems of the 27 member states.
Under its Article 287, most of the regulation applies from 21 September 2027. Parts linked to e-commerce and the new Authority follow on 1 July 2028, and the Data Hub becomes mandatory for all operators only on 1 March 2034. Until each date arrives, the old rule keeps working for that topic, which is why the reform feels distant and close at the same time.
| Date | What applies | What it means for hardware importers |
|---|---|---|
| 20 September 2026 | Regulation in force; EU Customs Authority starts its set-up in Lille | No change to clearance yet; the Commission starts drafting delegated and implementing acts |
| 21 September 2027 | Most provisions, including the importer definition and the new role of indirect representatives | Contracts with representatives and buyers should reflect who the importer is |
| 1 July 2028 | E-commerce importer rules, first Trust and Check simplifications, wider powers for the Authority | Mainly affects online sellers; trusted traders can start using new facilitations |
| 1 March 2031 | Voluntary use of the EU Customs Data Hub | Early adopters can file data through the hub; classic declarations remain possible |
| 1 March 2034 | Data Hub mandatory for importers, exporters and transit holders; importer becomes the customs debtor | Full switch to the data-driven model |

Who is the importer under the new Union Customs Code?
The importer is the person who decides that non-Union goods are brought into the Union. For the first time, EU customs law defines the role, in Article 5(13), instead of leaving it to the declarant who happens to sign the form.
Under the current code, the central figure is the declarant: whoever lodges the customs declaration, often a broker, becomes liable for the debt, and the business behind the goods sometimes stays in the background. The reform turns that around. Article 5(13) sets an order of persons: first the one who decides to bring the goods in, and only if no such person can be identified, others down the chain, ending with the carrier and the holder with physical control of the goods.
For a hardware deal, the person who decides is usually easy to spot. If a US server vendor sells on DDP terms and arranges delivery to a colocation site in Madrid, the vendor decides to bring the goods into the EU. If a German integrator buys ex works in Taiwan and books its own freight, the integrator decides. The incoterm and the sales contract, not the label on the customs form, will tell customs who the importer is.
If the idea of a formal importer is new to you, our guide on what an Importer of Record is explains how the role works in practice.

What changes for your EU indirect customs representative?
A lot. When a non-EU importer acts through an indirect representative established in the EU, the reform makes that representative assume all the obligations of the importer, including compliance with other EU rules that customs enforces, from 21 September 2027.
Today, an indirect representative lodges the declaration in its own name on your behalf, and under Article 77(3) of the current code both of you become debtors for the customs debt. The new text goes further. Recital 21 of Regulation (EU) 2026/2108 states that an indirect representative of an importer assumes all of that importer's obligations, and advisers such as EY describe the result as the representative becoming the sole importer towards customs. That covers duties and data, and it also covers checks on product safety and environmental requirements that customs applies at the border.
The practical effect is predictable. A representative that takes on the importer's full compliance role for a pallet of GPU servers will want the technical file, the EU declaration of conformity, the end-user details and the valuation documents before it accepts the shipment, not after the aircraft lands. Expect higher fees for complex or high-value hardware, longer onboarding, and contracts that let the representative refuse goods whose files are incomplete. Some forwarders that offer indirect representation as a cheap add-on to freight will simply stop doing it for regulated products.

Can a non-EU company still import into the EU without an EU entity?
Yes, but always through someone established in the Union. The reform keeps the rule that the person lodging customs formalities for an import must be established in the EU, and it adds that representatives acting for importers must be resident in the Union.
Under Article 170(2) of the current code, the declarant generally has to be established in the customs territory of the Union, which is why non-EU companies already work through an EU indirect representative. Recital 55 of the new regulation keeps that logic: goods may be brought into the Union only if an importer, or an indirect representative acting for an importer, is established there. A company in the United States, Brazil or Asia can still own the goods and sell them delivered duty paid, but it cannot carry the import alone.
So the decision for a non-EU vendor stays the same, with higher stakes. You can set up an EU entity and act as importer yourself, let your customer import, or appoint a representative or Importer of Record that will take the importer's obligations under the new rules. We compare those routes in detail in our guide on how to import into the EU without an EU entity. For shipments landing in Spain, it also helps to understand how importer of record arrangements in Spain are usually set up with a local partner.
What will the importer answer for besides duties?
Duties and import VAT remain, but the new importer also answers to customs for the non-customs rules that customs enforces at the border. For IT and telecom hardware, that means product safety, CE marking files, radio and cybersecurity requirements and, in some cases, environmental registrations.
None of these rules is new for servers, switches or radios. Products covered by the Low Voltage, Electromagnetic Compatibility and Radio Equipment directives already need an economic operator established in the Union under the Market Surveillance Regulation, and the Cyber Resilience Act adds vulnerability reporting duties for connected products. What changes is who customs holds responsible when something is wrong at release. Instead of chasing a manufacturer on another continent, customs can turn to the importer, or to the indirect representative standing in its place.
For a hardware vendor, the safest assumption is that every document a market surveillance authority could ask for after delivery will now be asked for before release. Our guide to CE marking for IT equipment lists the files an EU operator must hold for servers and network gear.
Import VAT works as before. The reform is a customs regulation, not a VAT one, so deferment schemes and postponed accounting continue to depend on national VAT law in each member state, as we explain in our guide to postponed import VAT in the EU.
How do Trust and Check, the EU Customs Authority and the Data Hub affect hardware shipments?
They change how customs decides which shipments to stop. A new Trust and Check status rewards transparent traders with faster release, the EU Customs Authority in Lille pools risk analysis across member states, and the Data Hub replaces declarations with shared data over time.
Trust and Check traders are a step beyond today's Authorised Economic Operators. To qualify, a company gives customs access to its electronic systems in close to real time, and in return it can release goods itself after arrival in many cases, without waiting for a customs check. The first simplifications start on 1 July 2028. For most non-EU hardware vendors the status will be out of reach, but the representatives and importers they work with may hold it, and that can shorten clearance for time-sensitive data center projects.
The EU Customs Authority, based in Lille, coordinates risk management across the Union, with a transitional period that runs until 30 June 2028 while it builds capacity. Combined with the Data Hub, that means a mismatch between your commercial invoice, your export file and your product data will be easier to spot, wherever the goods enter. Shopping for a "friendly" port of entry becomes less useful than keeping one consistent file.

Does the end of the EUR 150 exemption matter for B2B hardware?
Rarely. The reform removes the duty relief for consignments worth EUR 150 or less and adds a handling fee, but these rules target e-commerce parcels sold to consumers. Servers, switches and storage sold to businesses usually go through normal customs declarations anyway.
Where it can matter is spare parts. A vendor that ships small replacement components, optics or memory modules to EU customers by courier should check how those parcels are declared. Since 1 July 2026 a flat duty of EUR 3 per item already applies to low-value consignments declared through the postal channel or the Import One-Stop Shop, and the new handling fee will add a cost per item once its delegated act applies. For B2B spares, a regular declaration under the correct tariff heading is often cleaner than a low-value parcel flow.
What should non-EU hardware vendors do before September 2027?
Use the next ten months to decide who your importer will be and to make sure that party can carry the role. Most of the work is in contracts and documents, not in customs systems, and it costs far less now than after the first held shipment.
A practical checklist for 2027 deliveries into the EU:
- Name the importer in every sales contract and match it to the incoterm, so the person who "decides to bring the goods in" is clear for each deal.
- Review the agreement with your indirect representative or Importer of Record: who carries product compliance, what documents are due before shipping, and what happens if customs holds the goods.
- Build one technical file per product family, with the EU declaration of conformity, test reports, the name of the EU economic operator and the data needed for classification and valuation.
- Align export and import data, especially for US-origin GPUs that need export licenses, so the end user, site and serial numbers match on both sides.
- Ask your representative whether it plans to apply for Trust and Check status and how that would change release times for your shipments.
Teams that already ship regularly to the EU will find that most of these items exist somewhere in their organization. The reform simply makes customs, and the representatives who sign for you, expect them in one place, on time.
If you sell hardware into the European Union and want to know how the EU customs reform affects your next contracts, talk to Comex IOR Services. As an Importer of Record in the European Union, we can look at your products, routes and buyers and tell you who should act as importer, what documents we would need and how to keep deliveries on schedule under both the current code and the new one.
Frequently asked questions
When does the new Union Customs Code apply?
Regulation (EU) 2026/2108 entered into force on 20 September 2026. Most provisions apply from 21 September 2027, e-commerce rules and the first Trust and Check simplifications from 1 July 2028, and the EU Customs Data Hub becomes mandatory for all operators on 1 March 2034.
Who is the importer under the EU customs reform?
Article 5(13) of the new code defines the importer as the person who decides that non-Union goods are brought into the Union. In a hardware sale, the incoterm and the contract usually show who that is: the seller on DDP terms, or the buyer that arranges its own freight.
Can a non-EU company still import into the EU after the reform?
Yes, but not alone. Goods may enter only if the importer, or an indirect representative acting for it, is established in the Union. A non-EU vendor can sell delivered duty paid through an EU representative or Importer of Record, or let its EU customer import.
What changes for an indirect customs representative?
From 21 September 2027, an indirect representative acting for a non-EU importer assumes all of that importer's obligations, including product rules that customs enforces. Expect representatives to ask for complete technical and valuation files before they accept a shipment.
Does the reform change import VAT on servers?
No. The reform is a customs regulation, so import VAT, deferment schemes and postponed accounting still follow national VAT law in each member state. What changes is who answers to customs for the goods and the data behind the declaration.
Does the end of the EUR 150 duty exemption affect B2B hardware?
Rarely. It targets low-value e-commerce parcels. It can matter for small spare parts sent by courier, so vendors shipping optics or memory modules to EU customers should check that those parcels go through a regular declaration.



