Encryption hardware import rules: when switches, firewalls and storage need a license to enter a country
By Comex IOR Services · Published · Last updated · 13 min read

In this guide
- Do switches, firewalls and storage need an import license because of encryption?
- Why does the export side decide whether encryption hardware can ship?
- Which export classification applies to common encryption hardware?
- What does France require when encryption hardware enters the EU there?
- How do the five destination markets treat encryption at customs?
- Who handles each obligation: exporter, manufacturer or Importer of Record?
- What should the import file contain for encryption hardware?
- Encryption hardware import rules: which mistakes delay a shipment?
- Frequently asked questions
Encryption hardware import rules rarely add a separate import license in Argentina, Brazil, the United States, the European Union or Uruguay. The authorization that usually matters is an export one at origin, such as US License Exception ENC or an EU dual-use license, with one notable exception at import: France asks for a declaration to ANSSI.
That answer surprises many buyers, because almost every piece of enterprise hardware now ships with encryption inside. Campus switches run MACsec on their ports, firewalls terminate IPsec tunnels, storage arrays use self-encrypting drives and servers protect their management controllers with TLS. When a purchase order lands, someone in procurement or logistics asks whether a "crypto license" is needed to bring the equipment in. This guide explains where encryption controls really sit, how the export classification of your switches, firewalls and storage changes what you can ship and to whom, what France expects at import, and what an importer needs in the file so customs and auditors see a consistent story.
Do switches, firewalls and storage need an import license because of encryption?
In the five markets covered here, commercial encryption products do not need a dedicated import license. Customs clears a firewall or an encrypted storage array like any other IT good: tariff classification, value, origin and any telecom approval. France is the exception, with a prior declaration for cryptology means.
The reason is historical. Most countries control encryption as a dual-use technology, and dual-use systems are built around exports. The common reference is the Wassenaar Arrangement, whose list of dual-use goods dedicates Category 5, Part 2 to information security. The United States, the European Union and many other exporting economies copy that list into their own rules, and what they regulate is the item leaving their territory, not the item arriving. A handful of countries outside the markets we serve do license imports of encryption, which is why manufacturers sometimes ask about the destination, but Argentina, Brazil, the United States, Uruguay and the EU as a whole do not.
That does not mean encryption is invisible at import. Customs in each country will look at the tariff classification of the equipment, and telecom regulators check the approval of network and radio gear: Anatel in Brazil, ENACOM in Argentina, URSEC in Uruguay and the FCC in the United States. Auditors and the exporter's compliance team also expect the import file to match what was declared on the export side, including the export classification of each model. Our guide on how to import networking equipment covers the approvals for switches and routers in more detail.
Why does the export side decide whether encryption hardware can ship?
Because encryption controls travel with the goods. A switch designed in the United States keeps its US export classification when it is shipped from a warehouse in Europe or Asia, so the exporter must check the end user and destination before the order leaves. The import can only be as clean as that export.
In the United States, encryption items are controlled under Category 5, Part 2 of the Export Administration Regulations, administered by the Bureau of Industry and Security. Most enterprise hardware with strong encryption is classified under ECCN 5A002 and ships under License Exception ENC, set out in 15 CFR 740.17. Items that meet the mass market criteria, such as many access switches, servers and drives sold through ordinary retail and distribution channels, are often classified under ECCN 5A992.c and ship without a license to most destinations.
License Exception ENC itself has tiers. Most items fall under paragraph (b)(1), which lets the exporter self-classify and then file an annual self-classification report that must reach BIS no later than February 1 of the following year. Network infrastructure is different. Under paragraph (b)(2), routers, switches, firewalls and VPN gear that provide WAN, MAN, VPN, backhaul or long-haul encryption with an aggregate encrypted throughput equal to or greater than 250 Mbps need a formal classification request, and exports to countries outside Supplement No. 3 to Part 740 can start only 30 days after the complete request is registered. BIS explains these steps on its page about License Exception ENC rules for network infrastructure.
The end user matters as much as the product. Argentina, Brazil and Uruguay are not on Supplement No. 3, so (b)(2) network infrastructure may go to non-government end users and only to less sensitive government end users there, and other (b)(2) items only to non-government end users. Selling a core router to a public body in one of those countries can therefore require a license, even though a private company buying the same model would not.
The European Union follows the same logic through Regulation (EU) 2021/821, the EU Dual-Use Regulation. Its Annex I lists controlled items, including Category 5, Part 2, and the Commission adopted its latest update of that annex on 8 September 2025. A seller shipping 5A002 equipment from an EU warehouse to Brazil, Argentina, Uruguay or the United States needs an export authorization, a general export authorization that covers the route, or a mass market decontrol under the Cryptography Note.

Which export classification applies to common encryption hardware?
Classification depends on the exact model, its encryption functions and how it is sold, so the manufacturer's classification is the starting point. The table shows typical outcomes under the US rules, which most vendors use as their reference, and what each one means for the shipment.
| Hardware | Typical encryption | Typical US classification | What it means for the shipment |
|---|---|---|---|
| Campus or access switch | MACsec on ports, SSH and TLS management | 5A992.c mass market, or 5A002 under ENC (b)(1) | Usually ships without a license; the exporter self-classifies |
| Core router, data center switch or WAN gateway | High-throughput IPsec or MACsec, 250 Mbps or more of aggregate encrypted WAN traffic | 5A002 under ENC (b)(2), network infrastructure | Classification request and 30-day wait for Argentina, Brazil and Uruguay; limits on government end users |
| Next-generation firewall or VPN concentrator | IPsec and SSL VPN, TLS inspection | 5A002 under ENC (b)(1) or (b)(2), depending on throughput and design | Check the tier for each model; large VPN gateways often reach (b)(2) |
| Storage array or backup appliance | Self-encrypting drives, controller encryption, encrypted replication | 5A992.c or 5A002 under ENC (b)(1) | Usually no license; replication between sites can raise the classification |
| Server | TPM, encrypted BMC management, encrypted drives | Often 5A992.c; GPU servers may also carry 4A090 for computing performance | Encryption is rarely the limiting factor; computing controls may be |
| Hardware security module | Key management and cryptographic acceleration | 5A002 | Confirm the vendor's classification and end-user conditions before quoting |
Two points cause most of the confusion. First, the classification belongs to the model and its software, so a firmware upgrade or a license key that unlocks higher VPN throughput can move a product from one tier to another. Second, a server that is unremarkable from an encryption point of view can still be tightly controlled for its computing power. Our article on GPU server export controls explains how ECCNs 3A090 and 4A090 work alongside the encryption rules.
What does France require when encryption hardware enters the EU there?
France regulates the supply and import of cryptology means at national level. Under the Loi n° 2004-575 pour la confiance dans l'économie numérique and Décret n° 2007-663, importing them from outside the EU generally requires a prior declaration to ANSSI, the national cybersecurity agency, unless an exemption applies.
The use of encryption in France is free. The formalities fall on the supplier or the first importer, and ANSSI now receives them through its online procedures platform. Many large manufacturers have already declared their standard product lines, and ANSSI issues an acknowledgment that the importer can keep in its file. Smaller vendors, start-ups shipping their first appliances and resellers of niche security hardware often have not.
For a non-EU seller, this has a practical consequence. If the goods are released for free circulation in France, or if the importer is French, someone has to confirm that the declaration exists before the hardware is offered on the market. If the shipment clears in another member state and later moves to France, the French rules on intra-EU transfers still need a check. The EU-level rules on product security, such as CE marking and the Cyber Resilience Act, add obligations of their own but do not replace this national declaration.
How do the five destination markets treat encryption at customs?
None of the five applies an encryption import license, but each one has a checkpoint where an encrypted product can stall: telecom approval in Brazil and Argentina, radio approval in Uruguay, the French declaration in the EU and export rules on re-export from the United States.
In the United States, CBP clears encryption hardware like any other IT good, and there is no import license for it. The encryption rules come back into play when the equipment leaves again, for example when a US distributor re-exports servers to Latin America or sends a faulty unit for repair abroad, because the US export rules apply to that new movement.
In Brazil, the import runs through Siscomex under a company enabled in Radar, and the decisive approval for network and telecom equipment is Anatel homologation, which must be held by a company in Brazil. Encryption does not add a separate import authorization, but Brazil sits outside Supplement No. 3, so the exporter's checks on government end users apply to sales to public bodies.
In Argentina, the importer must be registered with ARCA, and telecom equipment needs ENACOM approval through the RAMATEL registry. As in Brazil, the encryption point sits on the export side, with the same limits for government end users. Uruguay follows a similar pattern: URSEC approves radio equipment, free trade zones are often used to hold stock, and encryption itself does not require import clearance.
In the European Union, the customs union has no import license for encryption, and import VAT and duties follow the usual rules of the member state of import. The national exception is France, described above. Storage buyers should also keep EU rules on data in mind when used drives cross borders, a point we cover in our guide on how to import storage systems.

Who handles each obligation: exporter, manufacturer or Importer of Record?
The exporter holds the export authorization, the manufacturer provides the classification, and the Importer of Record takes the legal role at destination: the import declaration, duties and taxes, local approvals and the French declaration check. Each party relies on documents from the others.
The manufacturer is the only party that knows the encryption design of its products, so its ECCN, its classification ruling from BIS where one exists and its French declaration are the foundation of the file. The exporter, which may be the manufacturer, a distributor or the seller in a DDP sale, must screen the end user, confirm that the ENC tier allows that destination and end user, and keep its own records. On the import side, the importer of record declares the goods, pays duties and taxes, obtains or verifies telecom approvals and keeps the customs file for the period the local law requires.
When the seller has no company in the destination country, those import duties fall on a third party acting as importer. If the concept is new to you, our guide on what an Importer of Record is and when you need one explains the role. For encryption hardware, a good importer of record does not apply for the export license, but it does notice when the end user on the purchase order does not match the end user declared to the exporter, and it stops the shipment before it becomes a compliance problem on both sides.
What should the import file contain for encryption hardware?
A clean file lets customs, auditors and the exporter's compliance team see the same facts. For switches, firewalls, storage and servers with encryption, it should include:
- The commercial invoice with model, quantity, value and the ECCN of each line, not one classification for the whole order.
- The authorization used for each line, such as NLR, License Exception ENC with its paragraph, or a license number.
- The manufacturer's classification ruling or self-classification reference for models in ENC (b)(2).
- An end-user statement naming the real end user, the installation site and the intended use.
- The French ANSSI declaration acknowledgment when the goods are placed on the market in France.
- Telecom or radio approvals for the destination, such as Anatel, ENACOM or URSEC, by exact model.
- Serial numbers, so repairs, returns and future re-exports can be traced.
Most of this paperwork already exists somewhere in the supply chain. The work is collecting it before the booking, not after the goods arrive.

Encryption hardware import rules: which mistakes delay a shipment?
Most delays come from paperwork that does not match: a single ECCN for a mixed order, a government end user nobody flagged, or a firmware upgrade that changed the classification. These are cheap to fix before shipping and expensive after.
The first mistake is the blanket classification. An order with access switches, a pair of core routers and a firewall cluster can contain three different encryption tiers. When the invoice shows "5A992" for everything, the exporter's own records stop matching the shipment, and any audit or customs query has to be answered line by line later.
The second is the end user. The US definition of a government end user is narrower than many sellers assume: utilities, telecom operators, banks, transport companies and civilian hospitals are generally not treated as government end users even when the state owns them, while ministries, regulators and agencies are. Check the actual buyer, and do it before you quote, because a 30-day classification wait or a license application can blow a project deadline.
The third is the feature unlock. Vendors increasingly sell the same chassis with performance or VPN licenses that are activated later. If the unlocked configuration reaches network infrastructure thresholds, the classification of what you shipped and what the customer runs are no longer the same. Plan the tier on the configuration the customer will use.
The fourth is France. Sellers who clear in another member state and then deliver to French customers often forget that the French declaration follows the product, not the port of entry.
If you are planning to ship switches, firewalls, storage or servers with encryption into Argentina, Brazil, the United States, the European Union or Uruguay, Comex IOR Services can act as your Importer of Record for encryption hardware. Send us the models, the destination and the end user, and we will map the classification, approvals and documents your shipment needs before it leaves the warehouse.
Frequently asked questions
Do I need an import license for a firewall with encryption?
Not in Argentina, Brazil, the United States, Uruguay or the EU as a whole. Customs clears it like other IT equipment. The authorization that matters is the export one at origin, plus a declaration to ANSSI when the firewall is imported into France.
What is the difference between ECCN 5A002 and 5A992?
Both cover encryption items under the US Export Administration Regulations. 5A002 applies to items with controlled encryption that usually ship under License Exception ENC, while 5A992 covers items released from 5A002, such as mass market products, which ship without a license to most destinations.
When does network hardware need a BIS classification request?
When it is network infrastructure under 15 CFR 740.17(b)(2), for example WAN, MAN or VPN gear with an aggregate encrypted throughput of 250 Mbps or more. Exports outside Supplement No. 3 countries can start 30 days after the complete request is registered.
Does France require a declaration for imported encryption hardware?
Generally yes. Under Loi n° 2004-575 and Décret n° 2007-663, the supplier or first importer declares cryptology means to ANSSI before supply or import, unless an exemption applies. Many large vendors have already declared their standard products.
Can I sell encrypted routers to a government agency in Brazil or Argentina?
Possibly, but check first. Neither country is in Supplement No. 3 to Part 740, so many ENC (b)(2) items cannot go to government end users there without a license. Utilities, banks and telecom operators are generally not government end users under the US definition.
Who is responsible for encryption compliance in an IOR shipment?
The exporter holds the export authorization and screens the end user, and the manufacturer supplies the classification. The Importer of Record handles the import declaration, duties, local approvals and the import file, and checks that its documents match the export side.



